Friday, January 29, 2010

Letter from the General Manager

Dear Valued Berlin City Toyota of Portland Toyota Customer:
Toyota Motor Sales recently announced that it will temporarily suspend sales and production of eight Toyota models affected by a sticking accelerator pedal mechanism. In rare instances, accelerators may mechanically stick in a partially depressed position or return slowly to the idle position.
Toyota made this decision on their own and not at the specific direction of a government agency – demonstrating it is a manufacturer committed to quality, reliability and customer safety.
Only vehicles manufactured in North America are involved. The vehicles involved are : 2005-2010 Avalon, 2009-2010 Matrix, 2009-2010 Corolla, 2009-2010 Rav4, 2007-2010 Tundra, 2008-2010 Sequoia, 2007-2010 Camry, and 2010 Highlander. VIN numbers that start with “JT” are not involved. We currently have over 150 new Toyotas available that are not affected by this campaign.
The condition is:
Over time, some accelerator pedal mechanisms may become worn. As a result of this wear combined with certain operating and environmental conditions, friction in the mechanism may increase and intermittently result in the accelerator pedal being hard to depress, slow to return or, in the worst case, stick in a partially open position. Toyota is in the process of preparing the remedy for the involved vehicles.
If you experience a sticking accelerator pedal while driving, Toyota recommends:
If you need to stop immediately, the vehicle can be controlled by stepping on the brake pedal with both feet using firm and steady pressure. Do not pump the brake pedal as it will deplete the vacuum utilized for power brake assist.
Shift the transmission gear selector to the Neutral (N) position and used the brakes to make a controlled stop at the side of the road and turn off the engine.
If unable to put the vehicle in Neutral, turn the engine off. This will not cause loss of steering or brake control, but the power assist to these systems will be lost.
If the vehicle is equipped with an Engine Start/Stop button, firmly and steadily push the button for at least three seconds to turn off the engine. Do NOT tap the Engine Start/Stop button.
If the vehicle is equipped with a conventional key-ignition, turn the ignition key to the ACC position to turn off the engine. Do NOT remove the key from the ignition as this will lock the steering wheel.
Contact us for assistance.
If you have further questions regarding this recall you can contact the Toyota Customer Experience Center at 1-800-331-4331
We at Berlin City Toyota of Portland want to make sure you know we are here to resolve any service issues involving your vehicle. You are the most important aspect of our business. Please don’t hesitate to contact us at Berlin City at 207-321-3477.
Once again we are here to serve you, answer any of your questions and resolve any issues to your complete satisfaction. We appreciate your business, patience and loyalty.
Sincerely,

Eric Johnson
General Manager
Berlin City Toyota Scion Lexus of Portland

Tuesday, December 15, 2009

Some recent fan mail!

Response Time: Very Fast!
Product Knowledge: Excellent
Overall Experience: Very Satisfied
Consideration of Time: Very Considerate!
Comments: All of the gentlemen in the showroom were courteous and helpful. Mark Hunter answered all of my questions on the phone and Jerrod was excellent in executing the sale. Mark Axelson was enthusiastic and had all the right answers, and the gentleman who did the paperwork was fun to work with. All in all a nice experience as I purchased my first non-Lexus in 20 years! So far, the Highlander Limited is living up to my expectations.

Patricia G.

To the whole team at Berlin City:

Thank you for the fantastic experience (again!) of buying a car at Berlin City. Mark Hunter and Jim Robertson really bent over backwards to expedite everything to work within our tight schedule and that was especially appreciated--that WAS "Over the Top Care!
We absoutely love our new Highlander Hybrid Limited and we wish you could have heard the squeals of delight from all three of our kids when they saw it in the driveway...priceless.
Wishing you all the best of Christmas and a successful 2010.
Kind regards,
Kevin and Sarah G.

Friday, May 1, 2009

Scion College Graduate Program

Eligible College Grads will receive a $1,000 rebate towards their purchase or lease!

Friday, April 17, 2009




















So I had a customer come in who is a cabinet maker. He looked at my 6 Cylinder 2 Wheel Drive Tundra Regular Cab Long Bed. We drove the truck and he was impressed with the handling and the smooth quiet ride. Then the trouble started when he pulled out the tape measure and declaired that the tail gate cannot close with a sheet of plywood in the back. "The tape don't lie" he said. So I wound up going to Home Depot and here's what I did. 



First I had to find some 4x8' OSB, fortunately they had it on sale! Out of my own pocket I plunked down the $6.64 in the name of science. A few short minutes later, I realized why I'm not in the building trades! Eventually I was able to singlehandedly wrestle the OSB into the back of the truck. As I suspected, it can lay flat between the wheel wells even with the drop in bed liner. But the point of contention was this... can the tail gate close without damaging the plywood?
Here is the proof!!!
Disclaimer: No wood or wood products were injured or abused at any time during this experiment. Documentation of purchase and subsequent return of said OSB are on record at Toyota of Portland. DO NOT TRY THIS AT HOME WITHOUT FIRST PURCHASING YOUR OWN TOYOTA TUNDRA FROM MARK HUNTER!!

Thursday, April 9, 2009

Communication Breakdown... In an effort to improve access to our company e-mail we are transitioning to a new system. As a result, several of you have tried to e-mail me only to have it bounce back as undeliverable. We are working on the problem and should have it resolved soon. In the meantime I can be reached at:


We do also have a fall back technology known as the Telephone which works by entering the following numbers:

1-866-698-3477 ext 6427
or
207-321-3477 ext 6427

Thanks to loyal customer Cecily Johnson for giving me the heads up on this glitch!